|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:1 version j 1.1 for more information: az displays, inc. 75 columbia, aliso viejo, ca, 92656 http://www.azdisplays.com
PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:2 technical specification contents no. item page - cover 1 - contents 2 1 application 3 2 features 3 3 mechanical specifications 3 4 mechanical drawing of tft-lcd module 4 5 input terminals 5 6 absolute maximum ratings 7 7 electrical characteristics 7 8 power on sequence 13 9 optical characteristics 14 10 handling cautions 17 11 reliability test 18 12 block diagram 19 13 packing 20 - revision history 21 PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:3 1.application this data sheet applies to a color tft lcd module, PD104SL7. PD104SL7 module applies to notebook pc, sub-note-book pc and other oa product, which require high quality flat panel display. this module is not designed for aerospace, avionics, medical, f/a, transportation, car or any other products, which require extreme level of reliability. prime view assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. features . amorphous silicon tft lcd panel with back-light unit . pixel in stripe configuration . slim and compact, designed for o/a application . display colors j 262,144 colors . optimum viewing direction j 6 o?clock . 3.3v lvds interface standard: thc63lvdf64a as receiver . +3.3v dc supply voltage for tft lcd panel driving . backlight driving dc/ac inverter not included in this module .long life lamp 3.mechanical specifications parameter specifications unit 26.4(diagonal) cm screen size 10.4 (diagonal) inch display format 800 (r, g, b) 600 dot display colors 262,144 active area 211.2(h) 158.4 (v) mm pixel pitch 0.264 (h) 0.264 (v) mm pixel configuration stripe outline dimension 238.6 (w) 171.0(h) 6.0(typ.) (d) mm weight 310(typ.),320(max.) g back-light single ccfl, side-light type surface treatment anti-glare display mode normally white PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:4 4. mechanical drawing of tft-lcd module typ polarizer) polarizer) bezel openibg) active area) bezel opening) active area) unit: mm PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:5 5. input terminals 5-1) tft-lcd panel driving connector type: molex 53779-1470 pin no. symbol function remark 1 vdd power supply : +3.3v 2 vdd power supply : +3.3v 3 gnd 4 gnd 5 in0- pixel data transmission pair 0 (negative -) 6 in0+ pixel data transmission pair 0 (positive +) 7 in1- pixel data transmission pair 1 (negative -) 8 in1+ pixel data transmission pair 1 (positive +) 9 in2- pixel data transmission pair 2 (negative -) 10 in2+ pixel data transmission pair 2 (positive +) 11 clk- sampling clock (negative -) 12 clk+ sampling clock (positive +) 13 gnd 14 gnd recommended transmitter (thc63lvdm63a thine) to PD104SL7 interface assignment: input terminal of thc63lvdm63a graphic controller output signal to PD104SL7 interface terminal(symbol) symbol no. symbol function output signal symbol tin0 44 r0 red pixel data (lsb) tin1 45 r1 red pixel data tin2 47 r2 red pixel data tout0- no.5 : in0- tin3 48 r3 red pixel data tin4 1 r4 red pixel data tout0+ no.6 : in0+ tin5 3 r5 red pixel data(msb) tin6 4 g0 green pixel data (lsb) tin7 6 g1 green pixel data tin8 7 g2 green pixel data tin9 9 g3 green pixel data tout1- no.7 : in1- tin10 10 g4 green pixel data tin11 12 g5 green pixel data(msb) tout1+ no.8 : in1+ tin12 13 b0 blue pixel data(lsb) tin13 15 b1 blue pixel data tin14 16 b2 blue pixel data tin15 18 b3 blue pixel data tin16 19 b4 blue pixel data tout2- no.9 : in2- tin17 20 b5 blue pixel data(msb) tin18 22 nc no connection tout2+ n0.10 : in2+ tin19 23 nc no connection tin20 25 enab compound synchronization signal clk in 26 nclk data sampling clock tclk out- tclk out+ no.11 : clk in- no.12 : clk in+ PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:6 data stream of in0-/+, in1-/+ and in2-/+ for PD104SL7 lvds interface block diagram graphic controller circuit tin0~tin5 tin6~tin11 tin12~tin17 tin18 tin19 tin20 tclk in r0~r5 g0~g5 b0~b5 nc nc enab clk in ttl parallel to lvds pll thc63lvdm63a lvds to ttl parallel pll thc63lvdf64a in0- in0+ rxout0~rxout5 rxout6~rxout11 rxout12~rxout17 rxout18 rxout19 rxout20 clk out lcd internal circuit in1- in1+ in2- in2+ clk- clk+ PD104SL7 module side customer system side 5-2) backlight driving connector type : ?bhsr-02vs-1? of japan solderless terminal mfg co. ltd pin no. symbol description remark 1 vl1 input voltage(high) 2 vl2 input voltage(low) rxout6 rxout5 rxout4 rxout3 rxout2 rxout1 rxout0 g0 r5 r4 r3 r2 r1 r0 in0 rxout13 rxout12 rxout11 rxout10 rxout9 rxout8 rxout7 b1 b0 g5 g4 g3 g2 g1 in1 rxout13 rxout12 rxout11 rxout10 rxout9 rxout8 rxout7 enab n c n c b5 b4 b3 b2 in2 PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:7 6. absolute maximum ratings: gnd=0v, ta=25 parameters symbol min. max. unit remark supply voltage vdd -0.3 +4.0 v input signals voltage v in -0.3 vdd+0.3 v note 6-1 backlight driving voltage v l - 2000 v backlight driving frequency f l 0 100 khz note 6-1: lvds signal . 7. electrical characteristics 7-1) recommended operating conditions: gnd = 0v d ta = 25 item symbol min. typ. max. unit remark supply voltage vdd 3.0 3.3 3.6 v current dissipation i dd - 350 450 ma note 7-1 lvds differential input high threshold v th - - 100 mv note 7-2 lvds differential input low threshold v tl -100 - - lamp current i fl 3.0 5.0 7.0 ma 5ma : 230 cd/m2 note 7-3 note 7-6 lamp voltage v l 477 530 583 vrms i fl =5ma note 7-3 starting voltage (25 ) (reference value) vs - - 1110 vrms starting voltage (0 ) (reference value) vs - - 1450 vrms note 7-4 lamp driving frequency f l 45 60 80 khz total power consumption (at i fl =5ma) -- 3.6 - w note 7-5 note 7-1 : to test the current dissipation of vdd, using the ?color bars? testing pattern shown as below 1 2345678 1. white 2. yellow 3. cyan 4. green 5. magenta 6. red 7. blue 8. black idd current dissipation testing pattern note 7-2 :please refers to thc63lvdf64a specification by thine corporation. this lcd module conforms to lvds standard. note 7-3 : the back-light driving waveform should be as closed to sine-wave as possible. in order to satisfy the quality of b/l , no matter use what kind of inverter , the output lamp current must between min. and max. to avoid the abnormal display image caused by b/l. PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:8 note 7-4 : the? max of starting voltage ? means the minimum voltage of inverter to turn on the ccfl. and it should be applied to the lamp for more than 1 second to start up. otherwise the lamp may not be turned on. note 7-5 : not including the efficiency of backlight dc/ac inverter note 7-6 : lamp current is measured with current meter for high frequency as shown below inverter tft-lcd module ~ a 1 2 * pin 2 is v low ** current meter : yo k o g awa 2016-01 7-2) input / output signal timing chart (a) vertical timing x , 1x , 2x , 3 x , 4 x , 598 x , 599 x , 600 x , y t 1 t 2 t 3 t 3 clk enab r5~r0 g5~g0 b5~b0 lamp current dissipation testing configuration PD104SL7 the information contained herein is the exclusive property of prime view in ternational co., ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior writt en permission of prime view international co., ltd. page:9 (b) horizontal timing t 3 t 4 t c clk enab r5~r0 g5~g0 b5~b0 1,y 2,y 3,y 4,y 5,y 6,y 7,y x,y 798,y 800,y 797,y 799,y $ - , u u u 7 * ) . j o |